News

  • 0
  • 0

How is titanium carbide made?

The Biden administration plans to ease sanctions on Venezuelan oil to allow more of the country's crude to reach Europe.  

The U.S. will allow European companies still operating in Venezuela to immediately transfer more oil to the continent, while allowing Chevron to negotiate a resumption of operations in Venezuela, according to people familiar with the matter.  Venezuela's OPPOSITION, which is backed by the United States, is understood to favor the move.  Tight global oil supplies have sent crude and fuel costs soaring, threatening to add to already high inflation.  Increasing Venezuelan crude exports would help ease supply constraints while also helping to reduce Europe's dependence on Russian energy.

The US has sought to encourage talks between the Venezuelan government and the US-backed opposition to open the way to free and fair elections by extending a limited license held by Chevron to allow the oil company to maintain its operations in Venezuela and negotiate future operations.  

The United States reportedly did not extend a permit to Allow Chevron to drill and sell Venezuelan crude, as the company had hoped.  

The license extension will allow Chevron to negotiate with State-run Petroleos de Venezuela SA, with which it has a joint venture.  Previously, the company could not directly negotiate with any officials sanctioned by the United States.  Chevron has been lobbying the United States to allow it to drill for Venezuelan crude and sell it on world markets to help lower energy prices amid the Russia-Ukraine war.

Affected by the ever-changing international situation, the supply and prices of many commodities like the titanium carbide are still very uncertain.

Carbothermal reduction method
TiO2 is reduced by carbon black. The reaction temperature range is 1700-2100℃. The chemical reaction formula is as follows:
TiO2 (s) + 3C (s) = TiC (S) + 2CO (g).
 
Direct carbonization method
Ti powder reacts with carbon powder to form TiC. The chemical reaction formula is as follows:
Ti (s) + C (s) = TiC
Because it is difficult to prepare submicron metal Ti powder, the application of this method is limited, the above reaction can be completed in 5-20 hours, and the reaction process is difficult to control, and the reactants agglomerate seriously, so it needs further grinding to prepare fine TiC powder. In order to obtain a purer product, the fine powder after ball milling needs to be purified by chemical method.
 
Chemical vapor deposition
The synthesis is based on the reaction between TiCl4, H2, and C. The reactant reacts with the hot tungsten or carbon monofilament, and the TiC crystal grows directly on the monofilament. The output and sometimes even the quality of the TiC powder synthesized by this method are strictly limited. In addition, due to the strong corrosiveness of TiCl4 and HCl in the product, special caution should be taken in synthesis.
 
Sol-gel method
The invention relates to a method for preparing small particle size products by fully mixing and dispersing materials with the help of solution. It has the advantages of good chemical uniformity, small particle size and narrow distribution, low heat treatment temperature, but complex synthesis process and large drying shrinkage.
 
Microwave method
Using nano-TiO2 and carbon black as raw materials, the material was heated by microwave energy based on the principle of carbothermal reduction reaction. In fact, using the dielectric loss of the material in the high frequency electric field, the microwave energy is converted into thermal energy, and the nano-TiO2 and carbon are synthesized into TiC.
 
Explosive impact method
Titanium dioxide powder and carbon powder were mixed in a certain proportion, and the precursor was prepared by pressing into a Φ 10mm × 5mm cylinder with a density of 1.5g/cm3, which was packed into a metal confined outer cylinder in the laboratory. The experiment was carried out in a self-made airtight explosion container, and the detonation ash was collected after the action of explosion shock wave. After preliminary screening, large impurities such as iron shavings are removed to get black powder. The black powder turned brown after being soaked in aqua regia for 24 hours, and finally put into muffle furnace and calcined 400min at 400℃ to get silver gray powder.
 
High frequency induction carbothermal reduction method
The pigment grade titanium dioxide powder and charcoal powder were weighed and mixed at 1:3 and 1:4, then added to the ball milling tank and milled for 6 hours on a planetary ball mill at a rotational speed of 300~400r/min, then the ball milling material was pressed into a 2cm × 2cm~2cm × 4cm block on a pressing machine, and finally the material was loaded into a graphite crucible and put into a high frequency induction heating equipment. Argon gas was used to protect the atmosphere. Gradually adjust the current of the high-frequency induction equipment to 500A to make the material have carbothermal reduction reaction and keep 20min. After the heat preservation, the reduction product is naturally cooled to room temperature in argon atmosphere, and the reduction product is taken out. After grinding and crushing, the ultra-fine titanium carbide powder is obtained.
 
Metal thermal reduction method
The solid-liquid reaction method is an exothermic reaction, so the reaction temperature is low, the energy consumption is low, but the raw material is more expensive, and the CaO and MgO in the product are pickled and can not be recycled.
 
High temperature self-propagating synthesis
The SHS method is derived from exothermic reaction. When heated to a proper temperature, the fine Ti powder has very high reaction activity, so once ignited, the combustion wave generated through the reactants Ti and C will have enough heat of reaction to form the TiC, SHS method, usually less than a second. The synthesis method requires high purity and fine Ti powder as raw material, and the output is limited.
 
Reaction ball milling technique
Reactive ball milling is a technology to prepare the required materials by using the chemical reaction between metal or alloy powder and other elements or compounds in the process of ball milling. The main equipment for preparing nanomaterials by reactive ball milling technology is high energy ball mill, which is mainly used to produce nanocrystalline materials. The mechanism of reactive ball milling can be divided into two types: one is mechanically induced self-propagating high temperature synthesis (SHS) reaction, and the other is reactive ball milling without obvious exothermic reaction, and the reaction process is slow.
 
Titanium carbide Price
The price is influenced by many factors including the supply and demand in the market, industry trends, economic activity, market sentiment, and unexpected events.
If you are looking for the latest Titanium carbide TiC price, you can send us your inquiry for a quote. (sales3@nanotrun.com
)
 
Titanium carbide Supplier
Luoyang Tongrun Nano Technology Co. Ltd. (TRUNNANO) is a trusted Titanium carbide manufacturer and TiC supplier with over 12-year-experience. We ship our goods all over the world.
 
If you are looking for high-quality Titanium carbide powder, please feel free to contact us and send an inquiry. (sales3@nanotrun.com
)
 

Due to the Russia-Ukraine conflict and the covid-19 pandemic, how will the international situation develop is highly uncertain. It is too difficult to assess its economic impact properly. However, we could see energy prices and commodity prices keep rising and supply chains are disrupted. Therefore, titanium carbide prices are expected to rise in the future.

Inquery us

NEXT NEWS

Our Latest News

How is titanium carbide made?

The Biden administration plans to ease sanctions on Venezuelan oil to allow more of the country's crude to reach Europe. The U.S. will allow European companies still operating in Venezuela to immediately transfer more oil to the continent, while all…

How can Nano materials modify plastics?

Recently, OPEC and the International Energy Agency (IEA) have made two different judgments on oil demand forecasts, which makes the already unpredictable price of crude oil even more complicated.OPEC believes that as rising prices put pressure on bus…

Effect of Nano Titanium Dioxide on Properties of Epoxy Resin coating

Titanium Dioxide nanoparticle is a pigment with strong coloring power and strong hiding power in white coatings, so it is very familiar in the coating industry.…